B112 is a digital wheel balancer for mobile service vans, for work benches, everywhere where space is restricted and top performances are still needed.
Designed to offer great performance in a small space, B112 is undoubtedly the perfect balancing machine for balancing on mobile service, thanks to its special software developed to offer the balancing service directly at the customer’s premises, all thanks to the FASEP TriSensor 3 Piezo balancing system, which always guarantees precision and reliability even in sub-optimal conditions. With its compact design, B112 can be easily placed and installed inside the van.
B112 also includes the 2D automatic gauge for automatic distance and diameter input and guided application of stick-on weights, ensuring maximum precision and time saving.
Features
2D gauge for automatic distance and diameter input and guided application of stick-on weights
Compartments for weights (6),
cones (3) and tools (1).
1140
853
0
box_left
ALU-SE
Automatic input/gauge to
measure and apply stick-on weights
1421
1743
71384
TRI_SENSOR
box_right
Tri-Sensor
3 sensors system
1648
2772
71385
IFS
box_right
IFS
Integrated-flange shaft system.
1822
2751
71713
box_bottom
75 kg
2977
282
71307
box_bottom
256
angular positions
2982
487
71319
box_bottom
RPM
98 low speed
2982
672
71313
box_bottom
16 bit
high resolution
3003
965
71318
box_bottom
ready for materials
3029
1288
3 sensors system
for unbalancing measurement
NO
no need of mechanical ties
YES
it is stable by itself
YES
the centrifugal force goes completely through the sensors
YES
the unbalance is completely measured
YES
with each type of wheel, also of large size or width, results are always perfect
FASEP wheel balancers are built around the TriSensor System,
a FASEP exclusive design. Developed in collaboration with
the University of Florence, TriSensor is a system for measuring
vibrations designed so that mechanical ties do not influence
the measuring system. By mean of the 3-sensors, the system
is “intrinsically stable” and no strong mechanical ties are
needed.
On the contrary, in the 2-sensors systems, the presence of one
or more mechanical ties alters the measurements of vibrations,
as the vibrations may not completely go through the sensors
but, at least partially, they go through the mechanical ties.
In TriSensor System, the centrifugal force caused by the
unbalance goes completely through the sensors as there is
no other mechanical tie. In such way, the vibration force is
therefore completely known and measured. This makes sure
that in every condition and with any type of wheel, wide small
or, measurements will be always perfect.
Fasep mechanics, view from top and exploded, with the 3 sensors clearly visible.
INTEGRATED FLANGE Shaft
for a perfect centering
The bell flange is integrated in the shaft. It doesn’t need to be mounted.
No tolerance of coupling.
The rear spring for the use of the inner cone is integrated in the shaft. It is not necessary
to mount it and it is protected against dirt, facilitating the operator in mounting the wheel.
Inner cone. Centering is absolutly easy and accurate.
YES
the bell flange is integrated in the shaft
NO
it doesn’t need to be mounted
NO
dirt or usury
YES
tolerances of coupling are eliminated
YES
it improves dramatically the centering accuracy
